6 Metre (VHF) |
|||||
Output MHz |
Input MHz |
Callsign |
Footnote |
Location |
Area |
53.825 |
52.825 |
VK7RAD |
Queen’s Domain |
S Tasmania |
|
2 Metre (VHF) | |||||
146.700 |
146.100 |
VK7RAD |
1 |
Queen’s Domain |
S Tasmania |
146.850 |
146.250 |
VK7RHT |
1 |
Snug Tiers |
S Tasmania |
146.9625 | 145.3625 | VK7RCR | 2 | Lenah Valley | S Tasmania |
147.975 |
147.375 |
VK7RAD |
Queen’s Domain |
S Tasmania |
|
70cm (UHF) | |||||
439.975 |
434.975 |
VK7RAD |
Queen’s Domain |
S Tasmania |
REPEATER FOOTNOTES:
1). VK7RAD (146.700) and VK7RHT (146.850) are permanently linked. A CTCSS tone of 141.3Hz is required for access to the 146.700MHz VK7RAD.
2). D-Star Repeater – VK7RCR D-Star Repeater Status. D-Star Repeater – Although capable of operating full duplex, the repeater is currently operating in simplex mode during the initial testing period. Simplex mode enables users to hold QSO’s through linked D-Star repeaters and reflectors; however local QSO’s are not currently possible. By default VK7RRR is connected to Australian D-Star reflector REF003C. If a user links VK7RRR to a different repeater or reflector then it will re-link to REF003C after 10 minutes of inactivity. At this stage VK7RRR is an experimental D-Star repeater and is located in a temporary location with limited coverage.
Beacons:
Freq MHz |
Callsign |
Location |
Area |
Grid |
6 metre (VHF) |
||||
50.297 |
VK7RST |
Mt Nelson |
S Tasmania |
QE37 |
2 metre (VHF) |
||||
144.470 | VK7RST | Mt Nelson | S Tasmania | QE37 |
IRLP Node:
For more information on IRLP try: irlp.net
Node No. |
Callsign |
Location |
Area |
6739 (146.700) |
VK7RAD |
Queen’s Domain |
S.Tasmania |
6739 (146.850) |
VK7RHT |
Snug Tiers |
S.Tasmania |
Check status.irlp.net/statuspage.html for node status information.
Echolink Node:
For more information on echolink try: www.echolink.org
Node No. |
Callsign |
Location |
Area |
Frequency |
331193 |
VK7RAD/ VK7RHT |
Hobart |
S.Tasmania |
146.700MHz & 146.850MHz |